2-in-one solution for measuring and switching
07.02.2023 – The ODT 3C sensor from Leuze performs measuring and switching tasks at the same time.
Automation
Two new oscilloscope series with 12-bit vertical resolution
With the HDO1000 and HDO4000 families, Rigol is launching two high-definition oscilloscope series with a vertical resolution of 12 bits
Ultra high temperature testing on ceramic composites
09.12.22 - With a customized high-temperature testing device from ZwickRoell , the material properties of ceramic matrix fiber composites can be tested in a vacuum and at temperatures of up to 2,000 °C under real operating conditions.
Measuring device for multi-component sensors
09.12.22 - GTM has developed a measuring device for multi-component sensors (MKA). The special feature: With the MKA calibration, the various force vectors are measured simultaneously and fully automatically.
Lots of power with high energy efficiency
28.11.22 - The 19 inch industrial workstation Spectra PowerRack 6000 /S10 SW680 High End System 2 offers high computing and graphics performance with high energy efficiency
Rugged computing with artificial intelligence
28.11.22 - Syslogic has introduced the RPC RML A3 AI Rugged Computer, which is suitable for use in harsh environmental conditions
Adaptable open frame panel PC
28.11.22 - Compmall's CO- W121C comes with a new open-frame concept that meets all mounting options - in the built-in version from flat mount to standard mount to rack mount and with VESA, arm mounting is also possible.
Connectivity & data management module for site monitoring
28.11.22 - STW has introduced the connectivity & data management module TCG-4lite, which offers a variety of connectivity options
New generation of Protocol converter/gateway
28.11.22 - Deutschmann Automation is presenting the new generation of its protocol converter/gateway series with Unigate Falcon
Handheld device becomes J1939 monitor
28.11.22 - A separately available add-in is now available for the handheld device PCAN-Diag FD from Peak-System for diagnosing communication on a CAN bus to also analyze J1939 data traffic.
Cleaning control reduces compressed air costs
Hesch offers operators of large filter systems an energy-saving alternative to conventional systems
Web design tool for active energy management systems
To simplify the tailor-made design, Michael Koch presents a web tool for application engineering.
Drive technology with Industrial Ethernet technology
10.11.2022 - At the SPS, EBM-Papst presented the ECI-63 internal rotor motors from the modular drive system for the first time, which are equipped with an EtherCAT interface.
Realize portal systems quickly and easily
10.11.2022 - With the new modular system from RK Rose+Krieger , linear, area and spatial portals can be constructed in a short amount of time.
Seals are an important component in rolling bearings
10.11.2022 - The most common designs are the Z cover disc and the 2RS seal, which Findling has in its portfolio.
Query engine status remotely
10.11.2022 - Dunkermotoren has presented its IIoT brand Nexofox . With Smart Diagnostics , Nexofox launches the first completely cloud-based product.
Control technology tailored to the European market
Inovance Technology Europe presented four products at SPS 2022 Nuremberg that the company has developed specifically for the European market.
Drive concept to reduce life cycle costs
05.09.22 - In customer projects, Nord Drivesystems aims to reduce the total cost of ownership (TCO) for the customer as much as possible.
Digital tool for product selection
05.09.22 - Rollon offers a wide range of linear guides, telescopic slides and linear axes.
Multi-axis solution with extended performance range
05.09.22 - Sieb & Meyer has expanded the performance of the SD2 multi-axis solution with integrated safety technology. A variant is now available in which the maximum rated current has been increased from 42 Arms@16 kHz to 80 Arms@16 kHz.
With EoE from Ethernet to Ethercat
05.09.22 - Dunkermotoren now also supports the Industrial Ethernet protocol EtherCAT. With EoE (Ethernet over EtherCAT), an Ethernet network can be connected to an EtherCAT network.
Servo amplifier supports common network configurations
05.09.22 - The B&R servo drive Acopos P3 can be used in all machines, no matter where in the world. Machine variants no longer have to differ from country to country, as the model is compatible with all common grid types worldwide.
IoT data exchange with OPC UA server
05.09.22 - Baumüller has implemented the areas of data access, security and methods within the standardized OPC UA interface and is presenting the ProDataX software tool.
High performance connectors for signals and power
05.09.22 - Plants that have a modular structure or machines that are used at different locations are often connected and disconnected several times a day.
Connection technology for the food industry
05.09.22 - Escha has launched a hygienic design portfolio that includes connection technology solutions for the three typical zones within beverage and food production: contact zone, splash zone and packaging zone.
Power Quality Analyzer Class A
05.09.22 - With the Chauvin Arnoux CA 8345, users can diagnose and troubleshoot an electrical system, check power consumption according to EN ISO 50001 and verify power quality according to EN 50160.
New version of a data analysis software
05.09.22 - The data analysis software IMC Famos receives an interface to the widespread programming language Python.
High-precision measurement of torsional vibrations
05.0922 - The laser tachometer Ifta LMM2 (Laser Measurement Module) is a fiber optic sensor that can be used in combination with an Ifta measuring system for non-contact measurement of rotational speed, angular velocity and vibration angle on rotors and shafts.
Torque flange series with high precision
05.09.22 - The new torque measuring flange series from Manner is precise, overload-proof (factor 4), easy to handle and the flange pattern and installation dimensions are compatible with competitor flanges.
Testing and sorting system for small components
05.09.22 - The Gefra Optisort Ostmini was developed to inspect particularly small screws and fasteners.
Angle sensor with automatic position correction and multiturn
05.09.22 - For the first time, the PVL4M development board offers the combination of a TMR angle sensor with the Hall sensor iC-PVL from ic-Haus for absolute angle measurement and counting of revolutions at the free end of the axis, the so-called end-of-shaft position.
Laser triangulation sensors for oil measurement
05.09.22 - The engine temperature of vehicles is monitored with oil temperature sensors (OTS). The sensors must function absolutely reliably and error-free in order to prevent the engine from overheating and thus being damaged.
Hygienic bimetal thermometer
05.09.22 - The new bimetallic thermometer from Wika, type TG58SA, meets the requirements of the pharmaceutical and food industries as well as biotechnology.
Magnetic position sensors with IO-Link
05.09.22 - With the WIM-IOL series, Turck is expanding its range of compact position sensors for detecting magnetic pistons in pneumatic or hydraulic cylinders. The new series consists of eight sensors with IO-Link 1.1 that cover measuring ranges from 32 mm to 256 mm.
Wire-actuated encoders in a new series
05.09.22 - In the three series (Premium, Compact and Basic), the models of the SL00 series form the entry into the world of FSG draw-wire encoders.
