18.02.2022 • Product • Machine Vision
Accelerator card for HPC and big data workloads
Xilinx has introduced the Alveo U55C data center accelerator card and a new standards-based, API-driven clustering solution for FPGA deployments.
Machine Vision
18.02.2022 • Product • Machine Vision
16K multifield TDI camera for multiple images in a single shot
Teledyne Dalsa's Linea HS 16k multifield TDI camera is now in volume production. The Linea HS 16K Multifield can simultaneously capture up to three images with light sources of different wavelengths in a single shot.
18.02.2022 • Product • Machine Vision
FPGA tool accelerates programming
Aries Embedded simplifies and accelerates the use of the Miami FPGA modules with the new version of the FPGA tool Dyplo 2.0 from Topic Embedded Systems.
18.02.2022 • Product • Machine Vision
Simultaneous streaming with four cameras
Teledyne Flir's new Quartet TX2 carrier board enables four high-performance USB3 board-level cameras to be streamed simultaneously at full bandwidth.
18.02.2022 • Product • Machine Vision
Fast 4K frame grabber for image analysis
The new high-performance card PCIe-HDV72 available from Acceed in PCI Express x4 Gen2/3 format supports HDMI 2.0 and thus lossless image transmission in 4K or Ultra HD.
18.02.2022 • Product • Machine Vision
Event-based vision sensors available
Macnica ATD now offers Sony's event-based vision sensor (“EVS”). The two sensors IMX636 and IMX637 were made possible through the cooperation between Sony and Prophesee, another distribution partner of Macnica ATD Europe.
18.02.2022 • Product • Machine Vision
Condition monitoring with industrial dashcam
With the Industrial Dashcam, Imago Technologies has developed a new solution for observing industrial processes and thus enables effective condition monitoring to optimize processes in a wide variety of industrial applications.
17.02.2022 • Contributions • Machine Vision
The world from the perspective of an infrared camera
An intelligent infrared camera speaks for itself. It talks about its range of applications in thermal process monitoring in industry, as well as certain evaluation functions.
11.02.2022 • Product • Machine Vision
Spot light for a millionth of a second
Evotron expands the product portfolio: In the area of high-performance LED spot lighting, the S-5x50 product series, which is equipped with Lumisens technology, is added.
11.02.2022 • Product • Machine Vision
Lenses for multiple depths of focus
Edmund Optics has expanded its offering with two new lens series from AdlOptica, which enable new applications in the field of laser optics.
11.02.2022 • Product • Machine Vision
USB3 cameras with more application possibilities
Allied Vision is equipping its Alvium 1800 U camera series with three additional fourth-generation Sony IMX sensors with Pregius S global shutter technology.
11.02.2022 • Product • Machine Vision
X-ray tomography with higher performance
With the Tomoscope XS FOV 500 from Werth, high-performance computed tomography is now available at the price of conventional 3D coordinate measuring machines.
11.02.2022 • Product • Machine Vision
3D high definition stereo imaging system with high zoom
Vision Engineering has announced a new product combination alongside Nikon's stereo microscopes, aiming to expand its range of inspection microscopy systems with a new higher magnification 3D digital inspection solution.
11.02.2022 • Product • Machine Vision
Software for digital microscopes with analytical functions
The new software from Olympus for the DSX1000 now extends the digital microscope with measurement functions and improves user-friendliness.
11.02.2022 • Product • Machine Vision
Bin picking solution on UR+ available
HD Vision Systems is now also offering its own bin picking solution on UR+, the automation platform from robot manufacturer Universal Robots.
11.02.2022 • Product • Machine Vision
2K miniature design expands product series
Type 2K photoelectric sensors are the latest members of Wenglor's PNG Smart product line.
11.02.2022 • Product • Machine Vision
Solutions for automated quality assurance
Creaform introduces additions to the R-Series product line, including the new Metrascan-R Black Elite HD 3D scanner with improved performance and a new version of VXelements designed for Long Term Support (LTS).
11.02.2022 • Product • Machine Vision
DC laboratory power supplies up to 1500 W
Emtron is expanding its range of high-quality and innovative power supplies with the intelligent and programmable iLS laboratory power supply series from the manufacturer Advanced Energy.
11.02.2022 • Product • Machine Vision
Controllable high-speed mirror
Cognex has launched a high speed steerable mirror.Designed for use with the Dataman 470 barcode reader, this patented technology streamlines barcode scanning and reading across large fields of view in a single, compact system.
09.02.2022 • Product • Machine Vision
Frame-based hyperspectral cameras for the VNIR spectral range
The HSC-2 hyperspectral cameras from Finnish manufacturer Senop are frame-based and provide snapshot images in the VNIR spectral range with up to 1,000 narrow spectral bands.
20.01.2022 • Product • Machine Vision
Camera protection housing for Flir A400/700, Dalsa Linea, Jai Fusion and other larger formats
With an extended inner radius, Autovimation's Megalodon series protective housings provide reliable all-around IP66/67 protection even for those camera types that are a bit too large for Orca series protective housings with the same outer diameter.
19.01.2022 • Product • Machine Vision
Package of 10GigE camera and host adapter card
Affordable entry into 10 GigE, that's what Teledyne Flir's package of an Oryx Series 10GigE camera and a Myricom host adapter card provides.
19.01.2022 • Product • Machine Vision
Interference-free 3D scans on reflective surfaces
Interference-free acquisition of 3D profile data on highly reflective surfaces is now made possible by the CX4090HS 3D scanners of the C6 series from Automation Technology. Multipeak is the name of this new function.
14.01.2022 • Product • Machine Vision
Check disordered objects quickly and precisely
Optometron has expanded its Vis-Vision software with the Deep Learning module. This module identifies and assesses objects that are also randomly present without structure, i.e. independent of the position, angle, size or lighting of the objects.
14.01.2022 • Product • Machine Vision
Possible applications with a view to Industry 4.0
Schneider Messtechnik expands the performance of its product range and thus opens up additional application possibilities with regard to Industry 4.0.
10.01.2022 • Product • Machine Vision
Precise measurement of mechanical axes
Trioptics has further developed the electronic autocollimators of the TriAngle series with a view to the specific requirements in mechanical engineering: A computer-aided straightness measurement of guide rails is carried out with an accuracy of up to 1 μm / m.
10.01.2022 • Product • Machine Vision
Embedded vision system in miniature format for OEM projects
With VC picoSmart, Vision Components presents an embedded vision system the size of a conventional image sensor module, which considerably simplifies and shortens the development of vision sensors. Image acquisition and processing are fully implemented on the board, which is only 22 x 23.5 mm in size.
10.01.2022 • Product • Machine Vision
Robust CNC CMM with a small footprint for high measuring accuracy
For rooms with limited workshop space, Vision Engineering's Deltron is a robust and accurate workshop CMM, combined with a space-saving footprint and compact design to ensure measurement stability. This unique combination is made possible by the modern design of the Delta mechanism with carbon fiber rod construction and intuitive software control.
10.01.2022 • Product • Machine Vision
Camera system with decentralized hardware platform
Vision Tools Image Analysis Systems introduces the next generation of the VoE product line. Vision over Ethernet is a camera system with a decentralized hardware platform based on module components. The heart of the platform is the VoE-SlyBox evaluation unit with 10 Gbit Ethernet interface and integrated image analysis software VisionTools V60.
10.01.2022 • Product • Machine Vision
Small USB3 camera with 18 Mpix
Ximea has prepared a particularly small industrial USB3 imager with the highest resolution to date for production. It is a miniature camera with an On Semiconductor CMOS sensor for 18 Mpix with more than 20 fps. The newcomer named MU181 is part of the xiMU series of industrial USB3 cameras that are equipped with the popular USB 3.1 Gen1 interface.
10.01.2022 • Product • Machine Vision
Smarc modules with Atom processors
In the series of Smarc modules in the new TQMxE40S module, TQ relies on the 6th generation of Intel Atom processors ("Elkhart Lake"). All twelve available processor variants of the series can be optionally equipped and thus cover the three important fields of application “PC / client”, embedded systems in the extended temperature range and industrial systems with requirements for continuous use.
10.01.2022 • Product • Machine Vision
Photoelectric barriers and buttons with IO-Link
The robust miniature sensors of the series O-21 miniature from disoric are only 28 x 8 x 14 mm in size. They quickly and reliably recognize small objects, positions and small differences in height, practically regardless of the surface. The light barriers and light scanners with red light LEDs enable reliable object detection with a high functional reserve. They are preferably used where there is little space available.
10.01.2022 • News • Machine Vision
Ametek Surface Vision and Sensory Analytics form Strategic Alliance
The partnership provides benefits to global coil coating, converting, and packaging leaders who are processing flat-profile products. The benefits include a combination of best-in-class solutions for in-process thickness measurement as well as surface detection and classification.
17.12.2021 • Product • Machine Vision
CT software: 3D rendering accelerated
The VG Studio Max, VG Studio, VG Metrology and VG Inline CT software family gets new features with version 3.5.2: faster 3D rendering, a new user interface for processing geometry elements, the ability to create a CAD model with fewer control points, and a feature to place arbitrary report content in sections.
17.12.2021 • Product • Machine Vision
Polytec expands portfolio with Swir cameras from Firstlight
Firstlight's high-end C-RED series swir cameras are ultra-fast, low-noise, and operate at 600 fps with less than 60 electrons of readout noise. This makes them particularly suitable for applications with low light, short exposure times and high-speed requirements.
