Automation

Photo
Product • Automation

Versatile all-in-one data acquisition system

The new 16-channel pressure scanner DSA5000 from Althen is an all-in-one data acquisition system for multipoint pressure acquisition. Each DSA5000 uses one pressure sensor per measuring channel. In addition, each of the 16 pressure sensors is digitized via a 24-bit A / D converter. This enables absolutely synchronous data acquisition with a sampling rate of up to 5kHz / channel. Extensive configurability and adjustments to the measurement signals are possible via the integrated high-performance controller.

Photo
Product • Automation

Breakout modules with PowerLok connector system

CSM presents new C (connector) variants of the high-voltage breakout modules (HV BM) for measuring current, voltage and power directly in HV lines. The C variants have a simple and safe plug-in system, which makes handling easier. The time required for the measurement setup is reduced. In addition, the new HV breakout modules C can easily be unplugged for calibration.

Photo
Product • Automation

Measurement technology software supports CAN interfaces

The measurement technology software Dasylab, distributed by the company Measx, has also supported CAN interfaces from Peak-System since the latest version 2020.1. Signals from external measuring devices that are transmitted via the CAN bus can be integrated into Dasylab applications with all PC interfaces of the PCAN series.

Photo
Product • Automation

12-in-1 measuring device

The software-configurable all-rounder Moku: Lab from SI combines up to 12 different electronic measuring devices in just one space-saving housing: work / function generator, lock-in amplifier, digital filter box and designer, spectrum and frequency response analyzer, PID controller, phase meter , Oscilloscope, laser lock box and data logger.

Photo
Product • Automation

Data logger for Ethernet and CAN

CSM is expanding the product portfolio of robust data loggers for automotive applications with the Unican 3 ETH for the acquisition of signals via Ethernet and CAN interfaces as well as digital inputs and outputs.

Photo
Product • Automation

front panel installation measuring device with integrated RCM measurement

The UMD 98 from PQ Plus is a high-performance front panel installation measuring device with integrated RCM measurement. It replaces all analog measuring devices and measures 3/4-phase current and voltage in 4-quadrant operation in class 0.2 and thus work in class 0.5s as well as all common network variables, e.g. electrical work, cos phi, short-term interruptions, and much more.

Photo
Product • Automation

Accurate torque flanges

Manner has introduced new torque flanges. They can be flexibly combined with all pick-ups and evaluation units, which can transfer the measurement data to the data acquisition system in the classic way as an analog signal, e.g. voltage, current, frequency +/- or as a digital signal via EtherCAT, Ethernet or CAN interface.

Photo
Product • Automation

Clock generator for flow turbines

Ephy-Mess developed the temperature sensor system including the rotary value / clock generator for a current turbine test stand for ocean and tidal current systems. The temperature of the roller bearings and the planetary gear should be determined at four measuring points.

Photo
Product • Automation

Shock data logger monitors transports

The MSR175 data logger from MSR Electronics, which is optimized for shock and shock measurements up to 200 g, is now also available in a version with a replaceable Li-SOCI2 battery, which allows an even longer operating time compared to the standard LiPo battery: This means that Transport and storage monitoring of sensitive goods possible over a period of more than two years.

Photo
Product • Automation

Portable device for calibration tasks

The new multi-function calibrator type CPH8000 is now available from Wika. The portable device measures pressure, temperature, current, voltage, frequency, pulse signal and environmental conditions. It is available as a handheld or in a case version with an integrated pressure pump.

Photo
Product • Automation

Digital rotation rate sensor

ASC expands its portfolio of digital sensors with the rotation rate sensor ASC DiSens 271 with SPI interface. The uniaxial gyroscope offers very good bias stability, a low angular random walk and great flexibility with regard to the measuring range. Thanks to the compact design and the practical self-test function, the sensor can even be used in safety-critical and difficult-to-access applications.

Photo
Product • Automation

Wiegand sensors in large numbers

The Wiegand sensors that fit on a fingertip, of which the sensor manufacturer Posital produces more than a million pieces annually, consist of short sections of Wiegand wire, a specially conditioned ferromagnetic alloy with very specific physical properties.

Photo
Product • Automation

Optical distance sensors with laser

The new distance sensors of the LAT-45 series determine positions and distances with a range of 200 to 10,000 mm. With a high level of extraneous light immunity, the universally applicable sensors reliably detect objects with different structures and light and dark surfaces.

Photo
Product • Automation

Press force for battery cell production

Tox Pressotechnik delivered 333 pneumohydraulic drives to the Korean chemical giant LG Chem. The largest single order for TOX power packs in the company's history was also technically complex: The company made the pneumohydraulic drives as a tailor-made special version for battery cell production.

Photo
Product • Automation

Modular zero point clamping system

Zimmer presents its new quick-change pallet system SPN. In addition to a standard variant reduced to the basic functions, which fulfills the basic functions such as unlocking and PLUS connection, there is also an advanced variant to choose from.

Photo
Contributions • Automation

Double the Grip

A new manufacturing cell that includes milling, loading, and unloading, plus clamping technology and sensors for improved reliability facilitates the production of worm gear screw jacks considerably.

Photo
Product • Automation

Component flexibility for mechanical engineering

In addition to Profinet IRT and Ethercat fieldbus, Baumüller offers various bus systems such as CANopen, VARAN, Modbus TCP, EtherNET / IP or Powerlink for the b maXX 5500 servo system. This makes Baumüller drive technology particularly flexible and enables it to be combined with system components from various manufacturers.

Photo
Product • Automation

Food safe motors for washdown environments

As recent tests have shown, ABB's Food Safe motors can handle even harsh washdown environments. The stainless steel housing prevents corrosion. In addition, protection class IP69 is achieved, which ensures that no damage occurs during high-pressure cleaning at high temperatures.

Photo
Product • Automation

Flange bearings for optoelectronics

The customer-specific system solutions from Rodriguez are often in demand in the optical industry - due to the limited installation space, particularly small and light solutions and special packaging are required here.

Photo
Product • Automation

Modular system for motor adaptation

Nabtesco has developed a flexible modular system for the servo gear units of the new Neco series. Combinations of standardized elements create a large number of defined interfaces that cover a wide range of drives without much effort. In this way, users can use the Neco gearboxes with all motor brands and types available on the market.

Photo
Product • Automation

Drive electronics for every application

With the Nordac product family, Nord Drivesystems offers electronic drive technology for almost every application. The frequency converters and motor starters cover a wide range of outputs up to 160 kW and, according to the manufacturer, offer performance and safety.

Photo
Product • Automation

Servo motor series with higher nominal torque

B&R is expanding its motor portfolio with the new servo motor series 8LW and 8LS with high torque density. Thanks to an improved design, in connection with the servo amplifiers of the Acopos series, a nominal torque of up to 75% higher than comparable motors is achieved.

202 more articles

Top-Feature

Award

inspect award 2026
Vote now!

inspect award 2026

The jury for the 2026 inspect award has nominated ten products in each category. With your vote, you decide which product deserves the inspect award 2026.