PRO-4-PRO Products for Professionals. On this page you will find products, solutions and services from all areas of automation, machine vision and photonics.
For use in hygiene-critical environments, Spectra is introducing the Panel PC of the Spectra Panel Z series with display sizes from 17 "to 21.5" and a resistive touchscreen. The use of stainless steel for the housing of this Panel PC guarantees a very high surface quality that can withstand highly corrosive environments as well as high pressures and temperatures.
Tsubaki Kabelschlepp has been developing application-specific cable carriers for use in telescopes for many years. They are used, for example, in the steel and plastic energy chain system, which is responsible for rotating the camera and the elevation axis of the LSST (Large Synoptic Survey Telescope) on the Cerro Pachón mountain in Chile at an altitude of over 2,600 meters.
The mobile measuring case MMD 98RCM records all voltage quality parameters and logs this data as one, three or four-phase measurement in the low-voltage network (230/400 VAC) in distribution networks in the transformer stations, MS / LV switchgear and as a direct consumption measurement on machines and in buildings.
The RTR500B series from T&D with Bluetooth technology is the next generation of the RTR 500 series, which, according to the manufacturer, combines increased security standards and easier operation. The system uses T & D's wireless short-range communication for transmission between the data logger and the base station.
To understand how radio technology works, the partner of Telemeter Electronic, Rigol Technologies, now offers a tool: The spectrum analyzer of the DSA800 class or the RSA3015N in combination with a TX1000 demo board is specially designed for the training area, but also specified for R&D measurements.
Polytec has revised its PSS series of NIR spectrometers: The new PAS spectrometers are based on the same optical structure, but with improved electronics. Design and testing has shown that the PAS and PSS spectrometers are completely interchangeable in current applications.
Soot is a black, powdery solid and an important component of plastics, which has a decisive influence on their physical properties. One of the world's leading suppliers of industrial carbon blacks uses a ZwickRoell roboTest N and an LTM 2 linear testing machine to characterize them in elastomers.
TDK announces the introduction of the AC-DC power supply series CUS350MP from TDK-Lambda. The series has certifications for medical and industrial safety, is designed for 350W with convection and 500W with air cooling.
With the Scalance MUM856-1, the first industrial 5G router from Siemens is now available. The device connects local industrial applications with public 5G, 4G (LTE) and 3G (UMTS) cellular networks.
IIoT projects can be implemented with the modular digitization platform Moneov from ifm. The individual modules work together seamlessly according to the “plug & work” principle, so that the system can be adapted to different requirements.
The PCAN-Router Pro FD, a 6-channel CAN FD router and data logger from PEAK-System, is now optionally available with an RJ-45 Ethernet interface.
In the future, Bihl + Wiedemann will be relying on a newly developed 30 V power supply generation. This is specially designed for ASi-5 communication and is therefore also ideal for mixed ASi-5 / ASi-3 applications.
Additional digital inputs and outputs are now available for the Psenscan safety laser scanner: Now up to 70 switchable configurations can be implemented and up to three separate safety zones can be monitored simultaneously thanks to the new 17-pin and master encoder variants.
Transferring industrial data from fieldbus systems to hard-to-reach locations without loss and with the highest level of reliability also works without the need for cabling. A suitable solution is the combination of echo ringing with Schildknecht's patented Dataeagle technology.
The new Mini-ITX mainboard KINO-KX from Compmall has either the Zhaoxin KX-U6580 or KX-U6780A onboard. Both variants are 8-core processors with 8 MB cache and 2.5 or 2.7 GHz clock frequency.
The connection technology specialist Escha is expanding its M8 connector range to include multi-pole versions with 8 pins. There are two cable qualities to choose from, which are particularly geared towards the requirements of the automation industry.
Interfaces that transmit data standards such as Profinet with Gigabit or Megabit Industrial Ethernet require a particularly high level of EMC protection and the best possible 360 ° shielding. In order to achieve the highest protection here, depending on the area of application (e.g. railway), the shield transmission is carried out separately or as often as possible connected to the protective conductor (PE).
Various hardware and software components are normally required in order to be able to visualize and analyze the states of machines and systems. The new Condition Monitoring Toolkit from Balluff bundles all the necessary components - and thus enables early error detection and predictive maintenance to be carried out quickly and easily.
Because of their reliable and trouble-free construction, Servotecnica slip rings are an option for equipping small to medium-sized wind turbines. They are used for the wind-dependent adjustment of the rotor blades or at the rotating transition between the nacelle and the tower.
In industry, pick-and-place tasks are mostly performed by robots. However, they have one major disadvantage: their use requires high investments. According to the manufacturer, leanP&P portal systems should perform the same tasks just as efficiently, but should be cheaper. The systems are based on the Lifgo rack and pinion drives from Leantechnik, which were specially developed for the precise, synchronous positioning of heavy loads.
Physik Instrumente (PI) has completely revised its portfolio of compact vertical positioning systems for microscope objectives - PIFOC. Significant improvements are higher dynamics, travel ranges of up to 800 µm and easier handling. The PIFOCs, which are suitable for installation in the objective nosepiece of both upright and inverted microscopes, are essential for applications in the life sciences, materials microscopy, quality assurance and the semiconductor industry.
Rodriguez developed special bearings with integrated magnetic mounts for a well-known company in the optical industry, which are required as a horizontal axis of rotation for an optical system. The customer opted for a system solution because the entire turning mode could be made flatter. The complete bearing system is manufactured in-house by Rodriguez, only the special seal and the rolling elements are purchased parts.
The Swiss innovation project "Intelligent Dark Warehouse" brings together partners from the most diverse areas of science and business. The goal: the development and design of future-proof warehouses that act intelligently and autonomously.
Gefran is expanding its elevator technology product portfolio with a new series of frequency converters. This covers a wide range of applications and contains both simple models for cabin drives in residential buildings and smart converters with a wide range of functions and a high level of convenience for more complex tasks - e.g. B. in high-rise buildings with several elevators.
In the food industry, machines and systems have to meet special hygiene and cleanliness requirements. DiMotion has developed a linear axis especially for this industry, which is made entirely of stainless steel.
Baumüller offers its three-phase synchronous motors DS2 with four different cooling options. In addition to the options radially air-cooled, axially air-cooled and water-cooled, the variant with an integrated fan is now available for sizes 132 and 160.
JVL offers two solutions for linear movements, both with ServoStep motors. One variant is a piston-style electrical actuator that is suitable for replacing pneumatic cylinders.
With the installation frames of the ER series from Ziehl, devices can be elegantly integrated into switch panels or switch cabinet doors in the distributor housing.
IEF-Werner has expanded its standard range to include linear drives with metal strip covers. On the one hand, the metal strip protects against the ingress of dirt or particles and, on the other hand, prevents particles from being released into the vicinity of the linear unit.
B&R has expanded its series of motor-integrated drives to include two particularly compact versions. The new devices have a powerful processor and are suitable, for example, for machine applications that require optimal positioning accuracy and synchronization. With the new versions, the ACOPOSmotor portfolio covers a power range from 283 W to 2.3 kW.
Megatron has presented the new HTx36E magnetic encoder. They come in a Ø36mm metal housing and count the number of revolutions even if the power supply fails. Megatron offers the encoders as incremental encoders or as absolute encoders with CAN bus / SSI interface.
The new ASC Aisys Vibrotherm not only measures vibrations, but also the oil temperature on bearings and gears. The smart sensor system is more compact than individual sensors and evaluates the measurement data itself. The sensor solution is therefore suitable for condition monitoring applications.
With the ultrasonic distance sensors of the new U1RT series, Wenglor combines the design with the ultrasonic technology of the U1KT and UMD product series. Thanks to IO-Link 1.1 and NFC interface, the sensor offers flexible setting options and data storage.
The new PT120520 laser button with IO-Link interface from ipf electronic achieves scanning ranges of up to 4000mm in M12 despite its compact design. Since the PT120520 works according to the time-of-flight method (time of flight measurement), object detection does not depend on the strength of the reflected light, but on its time of flight.
Rodriguez has Kaydon thin section bearings in its portfolio, whose range of applications includes, for example, the semiconductor or optical industry, medical and measurement technology and robotics.
