The servo amplifier Acopos P3 from B&R is now also available with a push-through cooler or cold plate cooling. With the new cooling variants, up to 60% of the heat loss can be given off to the ambient air outside the control cabinet.
Jumo has presented its own cloud service. The is based on the "Software as a Service" (SaaS) model and is a cloud-based application software with a predefined user interface. As an IoT platform for process visualization, data acquisition, evaluation and archiving, the Jumo Cloud enables worldwide access to measurement data via common web browsers.
Emergent Vision Technologies' new Zenith series is based on the QSFP28-100GigE interface. Advances in speed are largely driven by the availability of high quality image sensors such as Gpixel's Gsprint4521 sensor, which in turn are driven by the demands of high speed applications.
The tamper-proof MSR175plus data logger uses highly sensitive sensors to record critical transport events and also records the position with GPS.
Amsys sells pressure measuring cells from Silicon Microstructures, Inc. (SMI). The complete range is offered for all types and areas of printing. A distinction is made between differential / gauge pressure and absolute pressure measuring cells, the latter also for rough operating conditions.
In order to monitor the operation of lifting systems on a work ship, TR-Electronic Safety Encoders were attached to the rigging and lifting devices. The extended position is monitored on the lifting beam.
TWK presents a new safety rotary encoder for explosion protection according to ATEX, Zone 1/21.
With a new generation of control devices, Vega wants to make level and pressure measurement easier and clearer.
Posital is expanding the range of applications of its globally proven Ixarc encoder family with a modular accessory kit.
The magnetic angle sensors of the RFC-4800 series from Novotechnik are specially designed for mobile applications. They are compact, easy to mount thanks to the separate position encoder and record the angle of rotation over a full 360 degrees with a resolution of up to 14 bits.
The iC-Haus magnetic encoder ICs iC-MU200 and iC-MHL200 are now AEC Q100 (Grade 1) qualified - for use in automotive applications in the temperature range from −40 to +125 ° C.
Inductive measuring probes of the SM20 and 21 series from ABJödden can be autoclaved in special designs (special potting compound and special connection strands) for use in the medical field.
With the introduction of the DRS ../ DR2S .. motors in operating mode S9 for pure inverter operation, SEW-Eurodrive has made a compact drive solution available for the European market.
Together with partners, Groschopp has developed a compact, scalable electric drive platform for diesel-powered multifunctional vehicles.
In the past, Dunkermotoren had expanded its BG series to include the Profinet and Ethercat interfaces. This year, Ethernet / IP will follow as the third interface in order to be able to integrate the motors even more flexibly in various bus environments.
With the new PMC SC6 and PMC SI6 drive controllers, Pilz is expanding its portfolio of servo amplifiers to include space-saving, scalable systems for either single or multi-axis applications.
With the adjustment unit Domiline, IEF-Werner has an adjustment slide in its program with which, for example, measuring systems can be manually moved to any possible position. The adjustment unit has a modular structure and can be easily converted.
Hiwin is expanding its range of products to include compact and precisely positioned strain wave gears: the Datorker. The Datorker are gearboxes with high reduction ratios that are typically equipped with crossed roller bearings.
Moxa reports that it has received certification in accordance with the IT security standard IEC 62443-4-1. The tests and the audit for the certification were carried out by LCIE Bureau Veritas; The certification was issued by the certification body IECEE.
Mitsubishi Electric has expanded its SCADA product range. The "Genesis64 Basic SCADA" enables the visualization of data in small applications, but can also be scaled to medium-sized applications with optional extensions, depending on customer requirements.
Turck is expanding its range of robust and compact RFID solutions with the TBEC family to include fast interfaces for EtherCAT networks.
With connection technology from the Profinet Robotic series from Escha, data transmission rates of up to 100Mbit / s can be brought to the tip of a robot arm.
With the 360 ° shielded Mixo module CX 20S I, users can now achieve maximum resistance to EMC interference radiation when transmitting sensitive signals and safety-relevant circuits. With its 20 poles and characteristics of 4A rated current and 32V rated voltage, it is also suitable for high-power signal connections.
In a smart city there are a number of important states which should be monitored remotely. With the Lorawan radio network, a cost-effective connection of sensors and measurement technology is available.
The read / write heads (SLK) from Contrinex now enable even higher clock rates. The reason for this is new firmware that ensures optimal RFID communication. As a result, the SLK can now also meet extremely demanding requirements.
The August Steinmeyer company develops and manufactures ball screws for various industries such as machine tool construction, aviation and heavy-duty applications such as those typically found in injection molding or in presses.
Portwell introduces the LYNX-6000 series, a new generation of palm-sized box PCs for industrial IoT gateways based on the Intel Celeron N3350 CPU (formerly Apollo Lake platform). It can be used as a scalable infrastructure for data, virtual machines, servers and front-end applications.
Teledyne has introduced the LT Series of high-resolution USB3 cameras. With rugged housings and fully lockable USB3 ports, these cameras are designed for rugged 24/7 use.
The new CCL clamps from Icotek are suitable for mounting on all common C-rails with an opening dimension of 16-17 mm. The vibration-proof clamps offer high, flexible clamping ranges from 6 mm to 50 mm.
Applications based on innovative AI technology are becoming increasingly popular and are finding their way into numerous industrial areas. With the KI platform NRU-120S with integrated Jetson AGX Xavier module from Nvidia, the German distributor Acceed now offers a cost-effective solution for future edge computing applications of the AI.
Aries Embedded has introduced the M100PFS system-on-module (SoM). It offers an extended feature set with IP reference design, customized zero-stage bootloader, U-Boot as generic bootloader, Linux with Yocto support and Hart Software Services (HSS).
Harting is working on new functions that will facilitate data management relating to the company's products and solutions. These functions are primarily aimed at the rapid provision of product data and documents that are necessary for every electrical design documentation.
Chromasens is expanding its Allpixa Evo line scan camera family with three models compatible with the latest version of the CoaXPress interface (CXP 2.0).
Products Matrix Vision introduced at Vision include PCI Express camera modules for embedded vision and the Smart 3D camera family from its partnership with Roboception.
The Industrial CIS Scanner with Shape from Shading makes structured surfaces of the test objects visible in three dimensions.
