B&R is expanding its motor portfolio with the new servo motor series 8LW and 8LS with high torque density. Thanks to an improved design, in connection with the servo amplifiers of the Acopos series, a nominal torque of up to 75% higher than comparable motors is achieved.
The Scopecheck FB from Werth Messtechnik is now available with one, two, or three independent sensor axes. The multisensor technology is perfectly integrated and can therefore be used without restriction and without time-consuming sensor changes.
Sieb & Meyer has presented its three-level converter SD2M. The device has recently been available in additional versions that are especially suitable for applications in turbo blowers and turbo compressors.
With the Roba-brake-checker module, Mayr has developed a smart electrical component that enables the brakes to communicate without additional sensors.
Steute presents a new RF Rx SW868-NET-4S-A 48V radio receiver for the nexy radio network, which was developed with a view to applications in automated guided vehicle systems (AGV).
Wago is now offering new lean managed switches. The switches are available with 8 or 16 copper ports, with transfer rates of up to 1000 Mbit / s. Devices with two additional SFP slots (100/1000 Mbit / s) are optionally available, which can be used to connect fiber optic cables, for example.
Lenord + Bauer presented the easy-to-assemble i³SAAC-Precision-System. It consists of two standard minicoders, the i³SAAC-Precision-Box and the target wheels manufactured using the hobbing process.
For particularly demanding applications, Kundisch has developed a backlit Profiline keyboard that can be used in many areas, from vehicle technology and payment systems to medical technology.
With the SSW303HV, the Schmersal Group is now introducing a new sensorless standstill monitor. The SSW303HV only takes up 45 mm width in the control cabinet. The plug-in and coded connection terminals create the prerequisites for quick and error-free installation. An additional signal contact provides information about the error status of the block.
With the Flexi Compact, Sick presents a new modular safety controller that is characterized by an improved user experience in handling and safety engineering. At the same time, users can operate automated machines more productively thanks to the scalable scope of services and intelligent diagnostic functions of the safety controller.
TDK-Lambda has expanded the TPS series with a power supply unit with 48V, 83.3A and 4kW output power. The TPS4000-48 works with an industrial three-phase input. It works automatically with nominal 400, 440, or 480Vac Delta or WYE input without changing wiring or large, expensive step-down transformers.
Schneider Electric presents three new power supply series for the power supply of automation systems: "Modular ABLM", "Optimum ABLS" and "Panel Mount ABLP". The robust and compact power supplies of the three series are available with different housing dimensions and are each characterized by a different nominal output.
Kontron is now supporting companies with a compact platform for artificial intelligence, machine learning and deep learning. It integrates all Google TensorFlow-Lite applications and enables rapid development of your own AI applications.
HMS is expanding its range of gateways for networking energy components with new Ixxat SG-gateway variants with 4G / LTE radio modem. In addition, other device variants with a 4-port Ethernet switch are offered. B. networks in substations and power stations can be expanded more safely and easily.
Lapp presented the Etherline Robot PN Cat.5e. It corresponds to the new type R standard for Profinet cables on robots. It is suitable for industrial data cabling within or on the robot - in hose packages or freely laid.
The compact WLAN adapters WiFi-C and WiFi-Pro from Sigmatek enable efficient and wireless CPU communication. The adapters work in the 2.4 GHz frequency band and can therefore be used without restrictions worldwide. The plug & play device WiFi-C, which acts as a client, is already available. The WiFi-Pro is planned for further expansion, in which the adapter can be configured as a client or access point.
B&R has presented the Acopos 6D. The system is based on the principle of magnetic levitation technology: shuttles with integrated permanent magnets move without contact on a surface made up of motor segments. The electromagnetic motor segments are 240 x 240 mm in size and can be assembled into any shape.
An industrial wafer baking machine is complex in terms of control technology. The ignition process of the gas-fired long-tube burner alone comprises 20 individual steps. Numerous other process steps are added as the baking process continues. The wafer machine specialist Franz Haas-Waffelmaschine therefore decided in favor of a flexibly configurable, safe miniature control system that can be used to monitor and control not only the functional safety but also the burner control and thus the entire safety technology of the baking machines.
Mesago has canceled the SPS - Smart Production Solutions, which was to take place in Nuremberg from November 23rd to 25th, 2021. In addition to the increasing number of infections, the organizer mainly cited the 2G rule that now exists in Bavaria and an upper limit for visitors as reasons.
RS Components has inaugurated its expanded distribution center at the Bad Hersfeld location. It's the biggest in the company. After the project has now been completed from the technical point of view, RS gave selected customers and suppliers a deep insight into the highly automated system. In particular, the largest multi-shuttle system installed in Germany by the manufacturer Dematic is used here.
IAI Industrieroboter will open a new showroom in the office in Schwalbach am Taunus on November 10, 2021. From this day on, all electrical automation components from IAI can be viewed in person near Frankfurt Airport. In addition, this new showroom will also serve as a training center in the future to test the actuators and robot systems in practice and to learn their perfect integration and programming in training courses.
Nabtesco is expanding its activities in the automotive sector. Together with the company adcos, a company of the Nabtesco Group, the transmission specialist has developed a purely electromechanical steering and drive solution for commercial vehicles, thus targeting the next step towards autonomous driving.
With the auto-tuning function, Lenze has now automated and significantly simplified the setting of the control parameters for its i-series servo inverters. Apart from the servo converter, no additional measuring components are required.
No motor housing, no bearings, but high power density and dynamics as well as a large number of configurable design variants - this is what distinguishes the housing-less servomotors of the Cyber Kit Line series from Wittenstein.
With the Dynagear HR, Nidec Graessner has developed a new two-stage angular gear that is space-saving and also runs extremely smoothly. It complements the single-stage DynaGear transmission series.
With the ultrasonic distance sensors of the new U1RT series, IO-Link 1.1 and an NFC interface are combined in one housing. In barrier mode it works reliably up to 2,000 mm, in reflex mode up to 1,200 mm.
Kistler has improved its triaxial accelerometer 8763B050: Its measurement threshold has been reduced from 0.0004 to 0.00029 µg. This makes it particularly suitable for monitoring vibrations. It monitors the vibration in three mutually perpendicular axes.
The Surfacecontrol 3D 3500 sensor from Micro-Epsilon is used for high-precision inline 3D measurements. With a repeatability of up to 0.4 µm in the z-direction, the sensor reaches a new performance class.
Sensirion is now offering its miniaturized CO2 sensors through the sales network. The series consists of the CO2 sensors SCD40 and SCD41. Both sensors are based on the photoacoustic measuring principle and the patented Pasens and Cmosens technology from Sensirion, which enables a small sensor size in combination with high performance.
Turck has developed inductive sensors for detecting carbon, more precisely carbon fiber reinforced plastic. The sensor family, for which a patent is pending, detects both carbon fabric and pressed carbon parts. It is based on further developed uprox technology and therefore offers high switching distances and installation flexibility - for example for manufacturers of automobiles, wind turbines or sports equipment and their suppliers.
Lenord + Bauer now also has a threaded version of its speed sensors with one or, alternatively, two channels in its range. Thanks to common thread types and nominal lengths as well as individual cable assembly, these space-saving sensors can be easily integrated into existing structures without mechanical adjustments.
Kistler is expanding its portfolio of smart accessories. This ensures that piezoelectric sensors are optimally and safely positioned in every measurement configuration. CAD drawings and step-by-step instructions make installation easier.
ASC has presented new sensor systems. They were specially developed for intelligent monitoring solutions such as condition monitoring and predictive maintenance.
The retaining clips AV000142 and AV000141 from ipf electronic for M8 and M12 screw connections now provide a remedy and ensure order when connecting sensor cables.
Endress + Hauser is relaunching the Cerabar and Deltabar pressure measuring devices. The added Bluetooth interface makes them easier to operate and more efficient to maintain in protective devices. Heartbeat Technology also creates the basis for predictive maintenance and allows the device function to be verified without interrupting the process.
