24.04.2025 • NewsMaterialslighting

Sustainable LEDs with perovskites

The frontrunner candidates for the next generation of lighting and display technologies.

Cost, technical performance and environmental impact – these are the three most important aspects for a new type of LED technology to have a broad commercial impact on society. Now, this has been demonstrated by researchers at Linköping University. “Perovskite LEDs are cheaper and easier to manufacture than traditional LEDs, and they can also produce vibrant and intense colours if used in screens. I’d say that this is the next generation of LED technology,” says Feng Gao.

Researcher Muyi Zhang from the Linköping University holds a perovskite LED....
Researcher Muyi Zhang from the Linköping University holds a perovskite LED. (Source: O. Planthaber)

However, for a technological shift to take place, where today’s LEDs are replaced with those based on the material perovskite, more than just technical performance is required. That is why Feng Gao’s research group has collaborated with Olof Hjelm and John Laurence Esguerra. They specialize in how innovations contributing to environmental sustainability can be introduced to the market. Together, they have investigated the environmental impact and cost of 18 different perovskite LEDs, knowledge that is currently incomplete. The study was conducted using life cycle assessment and techno-economic assessment.

Such analyses require a clear system definition – that is, what is included and not in terms of cost and environmental impact. Within this framework, what happens from the product being created until it can no longer be used is investigated. The life cycle of the product, from cradle to grave, can be divided into five different phases: raw material production, manufacturing, distribution, use and decommissioning. “We’d like to avoid the grave. And things get more complicated when you take recycling into account. But here we show that it’s most important to think about the reuse of organic solvents and how raw materials are produced, especially if they are rare materials,” says Olof Hjelm.

One example where the life cycle analysis provides guidance concerns the small amount of toxic lead found in perovskite LEDs. This is currently necessary for the perovskites to be effective. But, according to Olof Hjelm, focusing only on lead is a mistake. There are also many other materials in LEDs, such as gold. “Gold production is extremely toxic. There are byproducts such as mercury and cyanide. It’s also very energy consuming,” he says. The greatest environmental gain would instead be achieved by replacing gold with copper, aluminium or nickel, while maintaining the small amount of lead needed for the LED to function optimally.

The researchers have concluded that perovskite LEDs have great potential for commercialization in the long term. Maybe they can even replace today’s LEDs, thanks to lower costs and less environmental impact. The big issue is longevity. However, the development of perovskite LEDs is accelerating and their life expectancy is increasing. The researchers believe that it needs to reach about 10,000 hours for a positive environmental impact, something they think is achievable. Today, the best perovskite LEDs last for hundreds of hours.

Muyi Zhang, PhD student at the Department of Physics, Chemistry and Biology, says that much of the research focus so far is on increasing the technical performance of LED, something he believes will change. “We want what we develop to be used in the real world. But then, we as researchers need to broaden our perspective. If a product has high technical performance but is expensive and isn’t environmentally sustainable, it may not be highly competitive in the market. That mindset will increasingly come to guide our research.” (Source: Linköping U.)

Reference: M. Zhang et al.: Towards sustainable perovskite light-emitting diodes. Nat. Sustain. 8, 315 (2025); DOI: 10.1038/s41893-024-01503-7

Link: Wallenberg Initiative Materials Science for Sustainability, Dept. of Physics, Chemistry and Biology, Linköping University, Linköping, Sweden

Award

AutomationsBest Award

AutomationsBest Award

The AutomationsBest Award is now entering its 3rd round. The award will be presented at SPS - Smart Production Solutions on 25 November 2025

SPS Atlanta

A New Era of Smart Manufacturing Begins

A New Era of Smart Manufacturing Begins

The inaugural SPS – Smart Production Solutions Atlanta starts soon, marking a significant milestone in the evolution of the SPS brand

most read

Photo
10.06.2025 • NewsMachine Vision

The winners of the inspect award 2025

This time, with two additional categories, “SMEs” and “Artificial Intelligence,” the selection was even larger than usual. But now they have been chosen: the machine vision products of the year 2025.

Photo
07.07.2025 • News

Quantum technologies on the rise

World of Quantum 2025 in Munich recorded impressive growth with 160 exhibitors from 16 countries and over 22,000 visitors from 41 countries.