Automation

Ultrasonic sensors with IO-Link

Microsonic

The new crm + level sensors from Microsonic are equipped with an IO-Link interface in version 1.1. In addition to the measured distances, the IO-Link interface also transmits identification, status and diagnostic values. Limit levels or switching points can be easily set with IO-Link.

The robust sensors cover a measuring range of 30 mm to 8 m with five scanning ranges. The additional digital display shows the distance value in mm / cm directly on the sensor. The push-pull switching output can also be used as a switching output (both pnp and npn) in the standard IO mode. The crm + sensors in an M30 stainless steel sleeve continuously record the level of liquids or bulk solids of all kinds that reflect sound. 

Contactless level measurement is possible regardless of color or transparency. Ultrasonic sensors are insensitive to dust and mist in the measuring section. The crm + ultrasonic sensors are protected with a PEEK film, which allows easy removal of dirt, e.g. B. Splashes during the filling process. A level control for aggressive media is also possible.

Contact

Microsoft Deutschland GmbH

Konrad-Zuse-Str. 1
85716 Unterschleißheim

+49 89 3176 0
+49 89 3176 1000

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!