Canadian researchers have developed a new 3D printing method – blurred tomography – that can rapidly produce microlenses with commer­cial-level optical quality. The new method may make it easier and faster to design and fabricate a variety of optical devices. “We purposely added optical blurring to the beams of light used for this 3D printing method to manu­facture precision optical components,” said Daniel Webber from the National Research Council of Canada. “This enables production of optically smooth surfaces.”

The researchers demonstrate the new method by using it to make a milli­meter-sized plano-convex optical lens with an imaging performance similar to a commercially available glass lens. They also show that the method can produce optical components that are ready to use in just 30 minutes. “We anticipate this method to be valuable for cost-effective and swift proto­typing of optical components due to the afforda­bility of the tomo­graphic 3D printer and the materials used,” said Webber. “Also, the inherent freeform nature of tomographic 3D printing could enable optical designers to simplify designs by replacing multiple standard optics with printed optics that have complex shapes.”

Tomo­graphic volumetric additive manufacturing is a relatively new manu­facturing approach that uses projected light to solidify a light-sensitive resin in specific areas. It allows an entire part to be printed at once without any support structures. However, existing tomo­graphic methods cannot directly print imaging-quality lenses because the pencil-like beams used cause striations that lead to small ridges on the component’s surface. Although post-processing steps can be used to create smooth surfaces, these approaches add time and complexity, which takes away the rapid prototyping advantage associated with tomo­graphic printing.

“Fabrication of optical components is costly due to the stringent technical specifications needed for a functioning lens, as well as the complex and time-consuming process of manu­facturing,” said Webber. “Blurred tomography can be used to make freeform designs in a low-cost manner. As the technology matures, it could allow much quicker prototyping for new optical devices, which would be useful for anyone from commercial manu­facturers to garage-based inventors.” To test the new method, the researchers first created a simple plano-convex lens and showed that it had an imaging resolution comparable to a commercial glass lens with the same physical dimensions. It also exhibited a micron-scale form error, sub-nanometer surface roughness and a point spread function close to the glass lens.

They also made a 3 x 3 array of microlenses using blurred tomography and compared it to an array printed with conventional tomographic 3D printing. They found that it was not possible to image a business card with the array printed with conven­tional means due to large surface roughness, but it could be done with the array printed with blurred tomography. Addi­tionally, the researchers demonstrated overprinting of a ball lens onto an optical fiber, which was previously only possible using an additive manu­facturing technique known as two-photon poly­merization.

The researchers are now working to improve component accuracy by optimizing the light patterning method and by incor­porating material parameters into the printing process. They also want to introduce automation of the printing time to make the system sufficiently robust for commercial use. “Tomo­graphic 3D printing is a rapidly maturing field that is finding use in many application areas,” said Webber. “Here, we leverage the intrinsic advantages of this 3D printing method to fabricate milli­meter-sized optical components. In doing so, we have added to the repertoire of optical manu­facturing techniques a rapid and low-cost alternative that could potentially have an impact in future technologies.” (Source: Optica)

Reference: D. Webber et al.: Micro-optics fabrication using blurred tomography, Optica 11, 665 (2024); DOI: 10.1364/OPTICA.519278

Link: Digital Technologies Research Centre, National Research Council of Canada, Ottawa, Canada