Inductive displacement and angle transducers for underwater use
20.02.2023 – The inductive displacement and angle transducers from a.b.jödden operate wear-free according to the functional principle of the inductive half-bridge or partial inductance distribution.
-
Due to the design of the inductive displacement and angle transducers, underwater use is possible up to 50 m water depth. (Picture: M.Heßhaus/a.b.jödden)
The contactless displacement or twisting of a NiFe core creates a corresponding inductance distribution in the two coil halves. In addition, the conversion into a standardised output signal is carried out by the integrated electronics. The connection cable is inserted into the waterproof encapsulated sensor through a pressure-resistant PG gland. This design allows underwater use up to 50 m water depth. In case of increased mechanical stress, a PU tube protects the displacement transducer from damage. Furthermore, the sensors can measure travels up to 360 mm and measuring angles up to 120 °.
Contact
a.b.jödden gmbh
Europark Fichtenhain A 13a
47807 Krefeld
+49 2151 516259 15
+49 2151 51 62 59 20
