News

Cascading femtosecond lasers into the mid-infrared

New quantum cascade laser to exploit nonlinear effects

29.12.2021 - The first demonstration of direct femtosecond-​pulse emission from a quantum cascade laser in the mid-​infrared region paves the path towards novel applications of ultrashort laser pulses.

Lasers that emit light not as a continuous beam but in extremely short bursts – typically of picosecond length or shorter – have transformed various fields of science and technology, from studying atomic and molecular processes at ultrafast time­scales to the precise delivery of highly concentrated amounts of energy for material processing and eye surgery. Versatile laser systems exist nowadays for many such appli­cations in the visible to near-​infrared range of frequencies. By contrast, devices at lower frequencies are often limited by relatively long pulse durations and low peak powers, and entail complex, bulky instru­mentation. This might be about to change now, owing to an advance in the group of Jérôme Faist at the Department of Physics of ETH Zurich. 

The scientists demons­trate for the first time the generation of powerful femto­second pulses in the mid-​infrared region. This is a frequency band of great practical interest, as it associated with the stretching, vibration and rotation of a broad range of molecules. In their experiments, the team used quantum cascade lasers. QCLs have enabled a multitude of funda­mental studies and practical appli­cations, in particular in the mid-​infrared range. However, ultrashort pulses have so far not been part of the toolchest provided by QCLs. This has been an important gap, given that QCLs generate mid-​infrared radiation directly. That is, they do not rely, as other types of mid-​infrared light sources do, on conver­ting light from higher to lower frequencies, which is typically an ineffi­cient process that limits the power levels that can be achieved.

The primary bottle­neck for generating ultrafast pulses with QCLs is that the fast dynamics of the active medium inside the cavity prevents high-​power pulses to build up. There are ways around this limita­tion, but pulses generated by mid-​infrared QCLs were until now limited to picosecond length and sub-​watt power, thus restricting their applica­bility. Now PhD student Philipp Täschler and his colleagues in the Faist group have neatly combined several techniques. Moreover, they exploited recent experimental and theoretical findings regarding the phase behaviour of trains of pulses emitted from QCLs, the frequency combs. Taking on board these new insights, they realized that well-​estab­lished methods for compressing pulses outside the cavity can be employed for the problem at hand. This proved to be the key to generating powerful ultra­short pulses in the mid-​infrared.

Not only did Täschler and colleagues tackle in their work the generation of such pulses. They developed as well a new optical-​sampling technique for charac­terizing these flashes of light, assuring them that indeed they succeed in pushing mid-​infrared pulses into a new regime. And this is precisely what they did. The team produced pulses as short as 630 femto­seconds in length – by a factor of five shorter than the state of the art – and of 4.5 watt peak power, which is roughly a factor of ten higher than what has been achieved before. These pulse lengths are close to the lower limit of what is funda­mentally possible for the optical bandwidth given. But with wider-​bandwidth sources, they expect that 300-​femtosecond pulses are in reach. Similarly, further improve­ments could push the peak power to some 100 watts. This raises the perspective for a direct and powerful source covering the full mid-​infrared spectrum.

These are bright prospects, all the more as QCLs are compact light sources that can be integrated on chips. As such, the advance of Täschler and colleagues promises to open up practical routes to accessing ultrafast dynamics across the molecular finger­print region. On the funda­mental side, the high peak powers too should enable a new class of experiments, exploiting nonlinear effects, which in turn could lead to new capa­bilities in precision measure­ments. (Source: ETHZ)

Reference: P. Täschler et al.: Femtosecond pulses from a mid-infrared quantum cascade laser, Nat. Phot. 15, 919 (2021); DOI: 10.1038/s41566-021-00894-9

Link: Institute for Quantum Electronics, ETH Zurich, Zurich, Switzerland

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!