Vision

High speed imaging systems

The high speed imaging systems from Southern Visions System Inc. European wide distributed by the BFi OPTiLAS company, fit in mostly all of your application.

Never mind if you prefer a USB 2.0 or Gigabit Ethernet interface, whether you like to safe onto a onboard storage or an external memory (for example the hard disk or RAM of your PC system), whether you prefer CMOS or CCD sensors with different possible frame rates, from the low budget camera with 200 frames per second till to the higher class cameras with up to 17.000fps. The system of your choice can be chosen from 5 different models:

  • The StreamView LR or HR high speed imaging system – the system of choice for lower budget and less requirements. The direct streaming to the hard disc or RAM memory with 200 or 250fps (depending on CMOS or CCD sensor technology) in VGA-modus is possible by using a GigabitEthernet interface.
  • TriggerView motion triggering system enables you to detect motion in-between a user defined field of view. The generated trigger can be given to a third party hardware or single shots can be taken.
  • The MemView high speed imaging system is the state of the art in the world of high speed imaging. With 532fps at full resolution, a CMOS sensor with 1.280 x 1.024 pixel and possible 17.000 fps with reduced resolution as well as the internal 1-16GB memory supports you with well know comfort and modern technology.
  • The GigaView high speed Imaging system combine all the above mentioned properties in one camera. No matter if you like to stream on a PC with 250fps over possible 8h or use the build in memory with frame rates up to 17.000 fps. The GigaView ensures that you undergo no surprise in most of you applications.

The wide range of additional accessories and analysis software around our high speed imaging systems completes the whole setup. Get in contact with us if you would like to have more detailed information’s or a deeper consulting especially in your application.

Contact

Acal BFi Germany GmbH

Oppelner Straße 5
82194 Gröbenzell
Germany

+49 (0) 8142 6520-0
+49 (0) 8142 6520-190

Top Feature

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

Top Feature

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier